Panasonic KX-TCD300FXS

17 HOW TO CHECK THE HANDSET SPEAKER OR
RECEIVER
1. Prepare the digital voltmeter, and set the selector knob to ohm meter.
2. Put the probes at the speaker terminals as shown below.
18 FREQUENCY TABLE (MHz)
BASE UNIT HANDSET
Channel No Transmit Frequency Receive Frequency Transmit Frequency Receive Frequency
1 1897.344 1897.344 1897.344 1897.344
2 1895.616 1895.616 1895.616 1895.616
3 1893.888 1893.888 1893.888 1893.888
4 1892.160 1892.160 1892.160 1892.160
5 1890.432 1890.432 1890.432 1890.432
6 1888.704 1888.704 1888.704 1888.704
7 1886.976 1886.976 1886.976 1886.976
8 1885.248 1885.248 1885.248 1885.248
9 1883.520 1883.520 1883.520 1883.520
10 1881.792 1881.792 1881.792 1881.792
Note:
Channel No. 10: In the Test Mode on Base Unit and Handset.
67
KX-TCD300FXS / KX-TCD300FXT / KX-TCA130FXS / KX-TCA130FXT