ex.)
Items Address Default Data New Data Remarks
C-ID (FSK) sensitivity 04 6B 00 01 (6dB up) 02 (12dB up) When hex changes from "00" to "01"or "02", gain
increases by 6dB or 12dB.
C-ID (DTMF) sensitivity 04 79 50 60 (6dB up) 70 (12dB up) When hex changes from "50" to "60"or "70", gain
increases by 6dB or 12dB.
SMS (FSK) sensitivity 04 6B 00 01 (6dB up) 02 (12dB up) When hex changes from "00" to "01"or "02", gain
increases by 6dB or 12dB.
Bell length 01 F7 32 (5sec) (*1) 1E (3sec) 14 (2sec) This is time until bell stops ringing. (Unit:100ms)
PULSE Dial speed
(10PPS → 20PPS)
03 48 28 (40msec) (*1) 14 (20msec) - This is pulse make time. (Unit:1ms)
03 49 3C (60msec) (*1) 1E (30msec) - This is pulse break time. (Unit:1ms)
01 E5 57 (870msec) (*1) 2C (440msec) - This is inter-digit time in pulse mode. (Unit:10ms)
(*1)
Bell length 32(hex) = 50(dec) → 50*100msec = 5000msec (5sec)
PULSE Dial speed (10PPS
→ 20PPS)
28(hex) = 40(dec) → 40*1msec = 40msec
3C(hex) = 60(dec) → 60*1msec = 60msec
57(hex) = 87(dec) → 87*10msec = 870msec
Note:
*: When you enter the address, please refer to the table below.
81
KX-TCD300FXS / KX-TCD300FXT / KX-TCA130FXS / KX-TCA130FXT