Panasonic KX-TCD951EB - Selecting the Handset Ringer Volume;Pattern

14
Settings
Selecting the Handset Ringer Volume/Pattern
You can program the desired handset ringer volume and pattern.
Make sure that the power is ON (p. 12) and the unit is in the stand-by mode.
1 Press .
2 Press G or F until “ F22 ” is displayed.
3 Press .
•The current volume is displayed and rings.
4 Press G or F to select the desired
level.
•Each time you press a button, the selected
volume is displayed and rings.
•To set to OFF, erase “ ” by pressing
G
until “ ” is displayed.
5 Press .
•A confirmation tone sounds and the
display will return to the stand-by mode.
•When set to OFF, “ ” will be
displayed.
PROG
OK
PROG
F iU
Ex. Level 3 is selected.
1 Press .
2 Press G or F until “ F23 ” is displayed.
3 Press .
•The current ringer pattern is displayed and
rings.
4 Press G or F to select the desired
pattern.
•You can press to to select the
pattern.
•Each time you press a button, the selected
pattern will be displayed and sound.
5 Press .
•A confirmation tone sounds and the
display will return to the stand-by mode.
PROG
6
1
OK
PROG
F23U i
Ringer volume
7 levels are available.The lowest level is 1.The
highest level is 6.The factory preset is 3. When
set to OFF, the handset will not ring.
Ringer pattern
You can program the desired handset ringer
pattern (6 patterns). The factory preset is
pattern 1.
Ex. Pattern 1 is selected.
KX-TCD951EB(008~015) 99.6.16 5:37 PM Page 14