Panasonic KX-TCD951EB - Cancelling a Handset

Chapter 4
33
Multi-Unit User Operations
Cancelling a base unit
If another handset is out of range and/or its
power is OFF when “Cancelling a Handset”, the
previous base unit number will still remain in the
cancelled handset.Therefore, you need to
cancel the base unit registered in the cancelled
handset.
Cancelling a Handset
Each handset can cancel itself or another
handset.
1 Press then .
2 Press .
3 Enter the base unit password (p. 23).
•The current registered handset number(s)
is/are displayed.
4 Enter the handset number(s) you want to
cancel.
•The selected handset number(s) flash(es).
•If you misdial, press the number(s) again.
5 Press .
•A confirmation tone sounds and the
display will return to the stand-by mode.
PROG
7
INT
PROG
1 Press .
2 Press G or F until “ F70 ” is displayed.
3 Press .
4 Enter the handset password (p. 23).
•Registered base number(s) is(are)
displayed.
5 Press the cancelling base unit number
to .
•The selected base unit number flashes.
6 Press .
•A confirmation tone sounds and the
display will return to the stand-by mode.
PROG
4
1
OK
PROG
70 i23456
Ex. Handset 1, 2, 3, 4, 5 and 6 are registered.
70 i23456
Ex. Handset 6 is cancelled.
F70U i234
Ex. Registered base units: 1, 2 and 4
KX-TCD951EB(030~035) 99.6.16 5:39 PM Page 33