Panasonic KX-TCD951EB - Paging;Intercom; Paging All Handsets from the Base Unit; Intercom between Handsets

36
1 Handset 1:
Press .
2 Handset 1:
Enter the desired handset number.
•“ ” is displayed and the paged handset
rings.
INT
Paging All Handsets from the Base Unit
The base unit user can page all handsets.
Intercom between Handsets
A 2-way intercom is available between handsets.
Ex. Handset 1 is paging Handset 2.
1 Press .
•All handsets will ring for 1 minute.
2 To stop paging, press again or press on one of the handsets.
•Intercom calls can be conducted within the
radio area of the current base unit, but not with
units in neighbouring radio areas.
3 Handset 2:
When the unit rings, press to
answer.
•The intercom duration is displayed.
4 Handsets 1 and 2:
To end the intercom, press .
Paging/Intercom
[ i] - [ 2 ]
888800-00-0 i
KX-TCD951EB(036~044) 99.6.16 5:39 PM Page 36