How to fix static and sound issues on Panasonic Telephone?
If you are experiencing static, sound cuts in/out, or fading on your Panasonic Telephone, or if there is interference from other electrical units, try setting the PS and CS away from other electrical appliances. Also, try moving closer to the CS.
What to do if Panasonic Telephone PS does not operate?
If the PS of your Panasonic Telephone does not operate, ensure that the power switch is turned ON.
Why does my Panasonic Telephone not ring?
If your Panasonic Telephone does not ring, it might be because the ringer volume is set to OFF or VIBRATION. To resolve this, set it to ring by pressing the Volume Control button. Alternatively, the PS might be out of range, or the Cell Station (CS) could be busy, so move closer to the CS or try again later. Also, the radio channel might be busy, or a radio communication error might have occurred, so try again later.
Why does the battery icon flash during a conversation on my Panasonic Telephone?
If the battery icon flashes or beeping tones sound every 5 seconds during a conversation on your Panasonic Telephone, it indicates that the battery is low. Charge the batteries fully.
Why does the alarm sound when I press Redial on my Panasonic Telephone?
If the alarm sounds after pressing the Redial button on your Panasonic Telephone, it is because a number is not saved in the Call Log.
Why doesn't my Panasonic Telephone show a strong radio signal?
If the display on your Panasonic Telephone does not show a strong radio signal even though you are near the CS, the PS user can normally still make calls. The current linked CS is still connected even though another CS is closer.
Why does the alarm sound during a conversation with a weak signal on my Panasonic Telephone?
If the alarm sounds during a conversation while receiving a weak radio signal on your Panasonic Telephone, it means the radio signal is weak. Try moving closer to the CS.
What to do if Panasonic Telephone PS stops working?
If your Panasonic Telephone's PS stops working during operation, try turning the power switch OFF and then ON again. If that doesn't work, re-insert the battery and try again.
Why can't I save a number in my Panasonic Telephone directory?
If you cannot store a phone number and name in the directory of your Panasonic Telephone, it may be because your entry exceeds the maximum digits or characters. Also, avoid pausing for over 30 seconds while programming.
What does "FAULT" mean on Panasonic Telephone?
If your Panasonic Telephone displays "FAULT", consult your dealer.
General| Type | Hybrid PBX |
|---|---|
| Max CO Lines | 12 |
| Max Extensions | 32 |
| Power Supply | AC 120V, 60Hz |
| Caller ID | Yes |
| DISA/OGM | Yes |
| SMDR | Yes |
| Operating Temperature | 0°C to 40°C |
To Next Page