To Next Page
A
aleeSep 6, 2025
What to do if outside lines are connected to the T2 / T1 on Panasonic PBX?
- JJennifer HarrellSep 6, 2025
Reconnect the outside lines to the T1 / R1 or T2 / R2 of the telephone jack using 2-conductor wiring.
What to do if outside lines are connected to the T2 / T1 on Panasonic PBX?
Reconnect the outside lines to the T1 / R1 or T2 / R2 of the telephone jack using 2-conductor wiring.
What does "CS Busy" mean on Panasonic Telephone?
If your Panasonic Telephone displays "CS Busy", it means the radio channel is busy. Please try again later.
Why can't I dial on my Panasonic Telephone?
If you cannot dial on your Panasonic Telephone, it might be because the number you dialed is restricted by the system, so you should consult your dealer. Alternatively, the key lock mode might be set. To cancel the mode, press the Function button for about 2 seconds. Also, the radio channel might be busy or a radio communication error occurred, so try again later.
Why does my Panasonic Telephone System not store all received calls in the Incoming Call Log?
If some received calls are not stored in the Incoming Call Log of your Panasonic Telephone System, it is because incoming calls via Voice Call/Paging/LCS/Auto Answer cannot be stored. Set at least one of the incoming call types to On.
What to do if my Panasonic Telephone System handset does not work?
If your Panasonic Telephone System handset isn't working, there could be several reasons. First, the battery might be drained, so charge it fully. If that doesn't work, check if the power is turned off and turn it on. As a last resort, try re-inserting the battery.
Why can't I dial on my Panasonic Telephone System?
If you cannot dial on your Panasonic Telephone System, it could be because the number you dialed is restricted by the PBX; in this case, consult your dealer. Alternatively, the key lock mode might be on. To cancel it, press the Joystick for about 2 seconds.
Why can't I save a number in my Panasonic Telephone directory?
If you cannot store a phone number and name in the directory of your Panasonic Telephone, it may be because your entry exceeds the maximum digits or characters. Also, avoid pausing for over 30 seconds while programming.
What does "FAULT" mean on Panasonic Telephone?
If your Panasonic Telephone displays "FAULT", consult your dealer.
What does 'Please Wait...' mean on my Panasonic Telephone System?
If your Panasonic Telephone System displays 'Please Wait...', it means the handset is connecting to the base unit. Wait for a moment.
How to fix static and sound issues on Panasonic Telephone?
If you are experiencing static, sound cuts in/out, or fading on your Panasonic Telephone, or if there is interference from other electrical units, try setting the PS and CS away from other electrical appliances. Also, try moving closer to the CS.
General| Type | Hybrid PBX |
|---|---|
| Max CO Lines | 12 |
| Max Extensions | 32 |
| Power Supply | AC 120V, 60Hz |
| Caller ID | Yes |
| DISA/OGM | Yes |
| SMDR | Yes |
| Operating Temperature | 0°C to 40°C |
