2.8 Resource Programming
General Programming 271
[805] External Pager Confirmation Tone
Description
Used to remove the confirmation tone for external pagers. The default setting sends
confirmation tone 2 to the external pagers before paging is broadcast. This programming
applies to all the external pagers.
Selection
On / Off
Default
On
Programming
1.
Enter
805.
Display: 805 EX PAGE TONE
2.
Press
NEXT.
Display example: Tone:On
3.
Keep pressing
SELECT
until the desired selection is displayed.
4.
Press
STORE.
5.
Press
END.
Conditions
The external pager is a user-supplied item. For KX-TD816, one external pager can be installed,
for KX-TD1232, two external pagers can be installed per system. External pagers 1 and 2 are
installed in the Master System, 3 and 4 in the Slave, if available.
Features Guide References
Confirmation Tone
Paging
To Next Page
Loading...
