Panasonic KX-TD1232 - Operator; Manager Extension Assignment

2.1 Manager Programming
General Programming 41
[006] Operator / Manager Extension Assignment
Description
Assigns the jack number for a manager and/or operators. The manager extension can perform
System Programming and manager services. The operators have the ability to perform operator
services.
Selection
•
OPE-1
(operator 1) /
OPE-2
(operator 2) /
MNGER
(manager)
• Jack number:
KX-TD816 –
01 through 16
KX-TD1232 –
01 through 64
Default
Operator 1 – Jack 01;
Operator 2 and Manager – Not stored
Programming
1.
Enter
006.
Display: 006 OP-1, 2, MGR
2.
Press
NEXT
to programme operator 1.
Display: OPE-1:Jack01
To programme another item, you can also keep pressing
NEXT
or
PREV
until the
desired one is displayed.
3.
Enter a
jack number.
To assign no operator or manager, press
CLEAR.
To change the current entry, press
CLEAR
and enter the new jack number.
4.
Press
STORE.
5.
To programme another item, press
NEXT
or
PREV.
6.
Repeat steps 3 through 5.
7.
Press
END.
Conditions
• Up to two operators and a manager can be programmed.
• For the KX-TD1232, jack numbers 01 through 32 are for the Master System and 33 through
64 are for the Slave, if available.
• The manager cannot be assigned the jack number of the Console Port set in programme
[007] Console Port and Paired Telephone Assignment.