2.2 System Programming
114 General Programming
[141] Charge Rate Decimal Point Assignment
Description
Assigns how many decimal places to set for the charge rate.
Selection
Number of decimal places:
0 through 8
Default
2
Programming
1.
Enter
141
.
Display: 141 DECI. POINT
2.
Press
NEXT
.
Display example: Fraction place 2
3.
Enter
the desired number
.
To delete the current entry, press
CLEAR
.
4.
Press
STORE
.
5.
Press
END
.
Conditions
• This programme is used when the rate is assigned in programme [142] Charge Rate
Assignment. The change in this programme is reflected automatically to programme [142].
• According to this assignment, the charge is displayed during the conversation and shown on
the SMDR print out.
• This assignment is used for the charge fee reference.
Features Guide References
Charge Fee Reference
To Next Page
Loading...
