Panasonic KX-TD1232 - System Data Printout

2.8 Resource Programming
General Programming 265
[802] System Data Printout
Description
Starts or stops printing the system data. All or a specific range of the current system-
programmed data is printed out. The ranges are as follows:
Manager
: Manager Programming [0XX]
System
: System Programming [1XX]
Timers
: Timer Programming [2XX]
TRS / ARS
: TRS / ARS Programming [3XX]
Outside line
: Outside Line Programming [4XX]
COS
: COS Programming [5XX]
Extension
: Extension Programming [6XX]
E1
: E1 Programming [7XX]
Resource
: Resource Programming [8XX]
Option
: Option Programming [9XX]
Selection
• Printout range number:
(All) /
0
(Manager) /
1
(System) /
2
(Timer) /
3
(TRS/ARS) /
4
(Outside line) /
5
(COS)
/
6
(Extension) /
7
(E1) /
8
(Resource) /
9
(Option)
•
Start / Stop
Default
Not applicable.
Programming
1.
Enter
802.
Display: 802 SYSTEM DATA
2.
Press
NEXT.
Display: Enter Range?
3.
Enter a
printout range number
or for "All".
Display: Print-Out:Start
4.
Press
STORE
to start printing.
Printing starts.
To stop printing, press
SELECT
and go to step 4.
When printing is completed, the display shows:
Display: Print-Out:Finish
5.
Press
STORE.
Display: Print-Out:Stop
6.
Press
END.