2.6 COS Programming
General Programming 237
[509] Off-Hook Call Announcement (OHCA)
Description
Determines which Class of Service (COS) are allowed to perform the Off-Hook Call
Announcement (OHCA) and Whisper OHCA function.
Selection
• COS number:
1 through 8,
( =all COS)
•
Enable / Disable
Default
All COS – Enable
Programming
1.
Enter
509.
Display: 509 OHCA
2.
Press
NEXT.
Display: COS NO?
3.
Enter a
COS number.
To enter COS number 1, you can also press
NEXT.
Display example: COS1:Enable
4.
Keep pressing
SELECT
until the desired selection is displayed.
5.
Press
STORE.
6.
To programme another COS, press
NEXT
or
PREV,
or
SELECT
and the desired
COS
number.
7.
Repeat steps 4 through 6.
8.
Press
END.
Conditions
• To assign all COS to one selection, press the key in step 3. In this case, the display shows
the contents programmed for COS 1.
Features Guide References
Off-Hook Call Announcement (OHCA)
Whisper OHCA
To Next Page
Loading...
