Panasonic KX-TD1232 - COS Programming; Toll Restriction Level - Day; Night

2.6 COS Programming
226 General Programming
2.6 COS Programming
[500-501] Toll Restriction Level – Day / Night
Description
Each extension must be assigned a Class of Service (COS). These programmes set the toll
restriction value for each COS in day or night mode.
Selection
• COS number:
1 through 8,
( =all COS)
• Level number:
1 through 8
Default
COS 1 through 7 – Level 1 (Day / Night);
COS 8 – Level 7 (Day / Night)
Programming
1.
Enter
a programme address (500 for day or 501 for night).
Display example: 500 TRS DAY LVL
2.
Press
NEXT.
Display: COS NO?
3.
Enter a
COS number
.
To enter COS number 1, you can also press
NEXT
.
Display example: COS1:1
4.
Enter a
level number
.
To change the current entry, press
CLEAR
and enter the new number.
5.
Press
STORE.
6.
To programme another COS, press
NEXT
or
PREV,
or
SELECT
and the desired
COS
number
.
7.
Repeat steps 4 through 6.
8.
Press
END.
Conditions
• To assign all COS to one selection, press the key in step 3. In this case, the display shows
the contents programmed for COS 1.