Panasonic KX-TD1232 - Executive Busy Override

2.6 COS Programming
232 General Programming
[505] Executive Busy Override
Description
Determines which Classes of Services (COS) are allowed to perform Executive Busy Override.
Executive Busy Override allows the user to interrupt an established call.
Selection
• COS number:
1 through 8,
( =all COS)
•
Disable / Enable
Default
All COS – Disable
Programming
1.
Enter
505.
Display: 505 EXEC BSY OR
2.
Press
NEXT.
Display: COS NO?
3.
Enter a
COS number.
To enter COS number 1, you can also press
NEXT.
Display example: COS1:Disable
4.
Keep pressing
SELECT
until the desired selection is displayed.
5.
Press
STORE.
6.
To programme another COS, press
NEXT
or
PREV,
or
SELECT
and the desired
COS
number.
7.
Repeat steps 4 through 6.
8.
Press
END.
Conditions
• To assign all COS to one selection, press the key in step 3. In this case, the display shows
the contents programmed for COS 1.
Features Guide References
Executive Busy Override