Panasonic KX-TD1232 - E1 Group-II

4.4 E1 Line Programming
E1 Programming 397
[781] E1 Group-II
Description
Assigns a signal type for Group-II parameters on the E1 line assigned to MFC-R2.
This programme is available for the KX-TD1232 only.
Selection
• Parameter number:
01 through 15
• Signal type:
Undefined / Subscriber / Operator / Collect Call
Default
Parameter 02 – Subscriber; Other parameters – Undefined
Programming
1.
Enter
781
.
Display: 781 GROUP-II
2.
Press
NEXT
.
Display: Parameter NO?
3.
Enter a
parameter number
.
To enter a parameter number 01, you can also press
NEXT
.
Display example: 01:Undefined
4.
Keep pressing
SELECT
until the desired selection is displayed.
5.
Press
STORE
.
6.
To programme another parameter, press
NEXT
or
PREV
, or
SELECT
and the desired
parameter number
.
7.
Repeat steps 4 through 6.
8.
Press
END
.
Conditions
Adjust to a setting of the connected telephone company.
Features Guide References
E1 Line Service