Panasonic KX-TDA100 KX-TDA200

2.2 Installation of the Hybrid IP-PBX
58 Installation Manual
2.2.10 Wall Mounting (KX-TDA200)
CAUTION
Drive mounting screws into the wall. Be careful to avoid touching any metal laths, wire laths or metal
plates in the wall.
1. Install 4 anchor plugs in the wall, using the metal bracket as a template. Fix the metal bracket with 4
screws (A).
Screw (A)
Screw (A)
Metal Bracket
Hammer
Anchor Plug
30 mm
(1-1/5 in)
6.5 mm
(1/4 in)
Wall
TOP
TOP
Anchor Plug
Metal Bracket