Panasonic KX-TDA100 KX-TDA200 - 3.3 Installation of the KX-TDA Maintenance Console; 3.3.1 Installing and Starting the KX-TDA Maintenance Console

3.3 Installation of the KX-TDA Maintenance Console
Installation Manual 161
3.3 Installation of the KX-TDA Maintenance
Console
3.3.1 Installing and Starting the KX-TDA Maintenance Console
System Requirements
Operating System
• Microsoft
®
Windows
®
98 SE, Windows Me, Windows 2000, or Windows XP
Hardware
• CPU: Intel
®
Pentium
®
133 MHz or better microprocessor
• RAM: at least 64 megabytes (MB) of free RAM (128 MB recommended)
• HDD: at least 100 MB of hard disc space
Installing the KX-TDA Maintenance Console
Notes
• Make sure to install and use the KX-TDA Maintenance Console for version 2.0.
• To install or uninstall the software on a PC running Windows 2000 Professional or Windows XP
Professional, you must be logged in as a user in either the "Administrators" or "Power Users" group.
• When the Hybrid IP-PBX is first connected to the PC via USB, a wizard should appear and ask you
to select the appropriate USB driver. Browse for and select the KX-TDA USB driver, which is copied
to the local drive during installation.
1. Copy the KX-TDA Maintenance Console setup file to a
local drive on the PC. (Its icon is shown here, on the left.)
2. Double-click the setup file to run the installer.
3. Follow the on-screen instructions provided by the
installation wizard.