EasyManua.ls Logo

Panasonic KX-TDA100 KX-TDA200

Panasonic KX-TDA100 KX-TDA200
194 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2.4 Installation of the CO Line Cards
Installation Manual 79
2.4.5 IP-GW4 Card
Function
4-channel VoIP gateway card. Compliant with VoIP H.323 V.2 protocol, and ITU-T G.729a, and G.723.1
CODEC methods. G3 fax support.
Accessory and User-supplied Items
Accessory (included): CD-ROM (including PC programming software and
documentation) × 1
User-supplied (not included): RJ45 connector
Notes
The maximum length of the cable to be connected to this optional service card is 100 m (328 ft).
The IP-GW4 card occupies the space of 2 free slots when it is installed in the Hybrid IP-PBX.
For programming instructions and other information of the IP-GW4 card, refer to the documentation
for the IP-GW4 card. To program the IP-GW4 card, use the PC programming software designed
for the IP-GW4 card.
To confirm the CO line connection, refer to "Confirming the CO Line Connection" in "2.12.1 Starting
the Hybrid IP-PBX".
Pin Assignments
RJ45 Connector (10BASE-T)
No. Signal Name Input (I)/Output (O) Function
1 TPO+ O Transmit data+
2 TPO- O Transmit data-
3 TPI+ I Receive data+
4-5 Reserved ––
6 TPI- I Receive data-
7-8 Reserved ––
RJ45 (10BASE-T)
LEDs
To private IP network
8
1

Table of Contents

Related product manuals