Panasonic KX-TDA100 KX-TDA200 - Page 61

2.2 Installation of the Hybrid IP-PBX
Installation Manual 61
2. Hook the cabinet onto the metal bracket, making sure that the unit slides down and onto the hooked
parts of the metal bracket. Use 2 screws (B) to fix both sides of the cabinet.
Notes
• Do not block the openings of the cabinet. Allow space of at least 20 cm (8 in) above and 10 cm (4
in) at the sides of the cabinet.
• Make sure that the wall behind the cabinet is flat and free of obstacles, so that the openings on the
back of the cabinet will not be blocked.
• Make sure that the wall behind the cabinet is not made of wood.
• Be careful not to drop the cabinet.
TOP
Screw (B)