Panasonic KX-TDA200 - Initial Settings

Customising Your Phone & System
130 User Manual
3.1.2 Initial Settings
The original settings are shown in bold letters in the shaded boxes. Find and mark your desired
selections for programming.
• If nothing is entered within one minute in the programming mode, the mode returns to the
normal status.
• To exit the mode at any time, lift the handset.
Which line do you prefer to
seize when you go off-hook
to make calls?
(Preferred Line Assignment
– Outgoing)
Your extension number
display
Item
Programming
Input
Selection & Parameter
No line
An idle outside line
A CO/GDN button
No line
Which line do you prefer to
seize when you go off-hook
to receive calls?
(Preferred Line Assignment
– Incoming)
A assigned outside button
A first ringing line
(01–24)
CO button no.
Follow
programming
input.
Press
ENTER.
To programme To exit To enter the programme mode
programming
input
Enter
parameter.
parameter
It shows PBX number, slot number and port number
<example>
EXT105:10308
PBX no. Port no.
Slot no.
0 0
0 1
0 2
0
1
3
2
Press
ENTER.
(CO)
OR
(01–24)
CO button no.
0
1
2
(CO)
OR
The Intercom line
OR
Press PROGRAM
or PAUSE.
PAUSE
PROGRAM
Press PROGRAM
or PAUSE.
OR
PAUSE
PROGRAM