Panasonic KX-TDA200 - Utilizing the Call Center

Operation
94 User Manual
1.8 Utilizing the Call Center
1.8.1 Leaving a Call Distribution Group (Log-in/Log-out,
Wrap-up)
To set Log-in/Log-out
You can set your status in a receiving group. Set the
Log-out mode when you leave the office so that
incoming calls will skip your extension in the receiving
order. When you return, set Log-in so that calls will
reach your extension. (Default: Log-in)
Even if your extension is in the Log-in mode, you can
have a specified time period (wrap-up time) not to
receive a next call automatically after having a
conversation. This time is used for you to write a
report and so on.
And you can also select in manual if you leave a call
distribution group for a while (Not Ready mode).
log-in
log-out
wrap-up
No Picture Available
Off-hook.
On-hook.
PT/SLT/PS
C.Tone
Press Log-in/Log-out.
Or enter 736 and then 0 or 1.
Log-out
Log-in
0
1
OR
3 67
Specified
OR
All
OR
receiving group
extension no.
(G-DN)
Enter receiving group extension
number or press G-DN or .
Specified