Panasonic KX-TDA200 - Page 15

Operation
User Manual 15
TRANSFER
:
Used to transfer a call to another party.
HOLD
:
Used to place a call on hold.
FLASH/RECALL
:
Used to disconnect the current call and
make another call without hanging up.
Conference
:
Used to establish a multiple party
conversation.
VOICE CALL/MUTE
:
Used to monitor an intercom call
automatically, but it cannot be used for
hands-free conversations. It also
mutes the handset microphone during
a conversation.
SAVE
:
Used to store a dialled phone number
and redial.
Call Forwarding/Do Not Disturb
(FWD/DND)
:
Used to perform Call Forwarding or Do
Not Disturb.
PROGRAM
:
Used to enter and exit the Personal
Programming mode.
ANSWER
:
Used to answer an incoming call.
RELEASE
:
Used to disconnect the line.
Navigator Key/Jog Dial
:
Used to adjust the volume and the
display contrast or select desired items
for each function.
Programmable Function (PF)
:
Located on the upper part of the CO
button or on the Console.
Assigns the
desired button and used to access the
stored function. Mostly used as a One-
Touch Dialling button. (Only the "F and
number" may be shown on some
telephones.)
MODE
:
Used to shift the display to access
various features.
SELECT
:
Used to select the displayed function or
to call the displayed phone number.
TRANSFER
HOLD
FLASH
CONF
VOICE CALL
MUTE
SAVE
FWD/DND
PROGRAM
ANSWER
RELEASE
(PF)
MODE
SELECT