Panasonic KX-TDA200 - Page 56

Operation
56 User Manual
Holding in a system parking zone (Call Park)
You can put a call on hold in a common parking zone of the PBX. You can select to put a call in the
specified parking zone or automatically. Any extension can retrieve the parked call. You can use this
as one of transferring features.
To set
During a conversation
Press Call Park.
PT/PS
(Call Park)
Enter a specified parking
zone number (2 digits) or press
to park at an idle park area
automatically.
During a conversation
Press TRANSFER.
PT/PS
TRANSFER
On-hook.
C.Tone
If you hear a busy tone, enter another
parking zone number or press again.
25
Dial 52.
parking zone no.
OR
Specified
Auto
During a conversation
Press hookswitch.
OR
SLT
On-hook.
C.Tone
Enter a specified parking
zone number (2 digits).
If you hear a busy tone, enter another
parking zone number.
25
Dial 52.
parking zone no.