• Some PC LAN cards allow VLAN settings to be assigned. However, when using a PC connected to an
IP-PT with
2 ports, the VLAN settings for PC communications must be assigned only to the secondary
port of the IP-PT. Any VLAN settings assigned to the PC LAN card must be disabled. These settings
can usually be identified by "802.1Q", "802.1p", or "VLAN" in their name.
• If you are using an IP-PT with a primary port only (e.g., KX-NT265), a PC cannot be connected to the
IP-PT.
10 Information about IP Proprietary Telephones
1.3.2 VLAN (Virtual LAN)
To Next Page
Loading...
