Panasonic KX-TDA30

4.4 Configuration of IP Ports
A KX-NT300 series IP-PT
user or KX-NT265 IP-PT (software version 2.00 or later) user can configure the port
number of PTAP, DHCP, and FTP ports. Consult your network administrator to check whether the configuration
of the IP ports is required.
Follow the procedure below to configure the port number of the IP ports.
KX-NT300 series (except KX-NT321)
Select "IP Port".
ENTER 7678 ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
1024 – 65535
Port No.
Password
To configure the port number of PTAP Ports
To start programming
Select "PTAP Server Port".
Select "PTAP Server Port".
Select "Primary PBX".
Select "Secondary PBX".
To configure the port number of DHCP Ports
ENTER 1024 – 65535 ENTER
Port No.
Select "PTAP Client Port".
ENTER 67, 1024 – 65535 ENTER
Port No.
Select "DHCP Server Port".
ENTER 68, 1024 – 65535 ENTER
Port No.
Select "DHCP Client Port".
Press "SETUP"
when it is displayed.
SETUP
Continued on next page
1024 – 65535
Port No.
To configure the port number of PTAP Ports for the Secondary PBX (optional for
software version 2.00 or later only)
Software version 2.00 or later only
52 Information about IP Proprietary Telephones
4.4 Configuration of IP Ports