Panasonic KX-TDA30

KX-NT265 (software version 2.00 or later only)
To set the DS field value
To start programming
Press PROGRAM while
"Searching" is displayed.
PROG.
Press VOLUME to
select "QoS".
VOL
Press SP-PHONE. Press VOLUME to
select "Diffserv".
VOL
Press SP-PHONE.
The IP-PT will reboot
and establish connection
to the network.
To end programming
Press STORE.
Press HOLD to return
to the Menu screen.
HOLD
Press VOLUME to
select "DS (Enable)".
VOL
Press SP-PHONE.
Diffserv
0.0–7.7
Press SP-PHONE.
Information about IP Proprietary Telephones 51
4.3 Setting the Diffserv Parameters