Panasonic KX-TDA30

KX-NT321
To set the DS field value for the primary port
To set the DS field value for the secondary port
To start programming
Press PROGRAM while
"Searching" is displayed.
Select "QoS". Select "Diffserv".
The IP-PT will reboot
and establish connection
to the network.
To end programming
Press STORE.
Press HOLD to return
to the Menu screen.
Select "Primary Port".
Diffserv
0.0–7.7
Press SP-PHONE. Press SP-PHONE.
Select "DS (Enable)".Press SP-PHONE. Press SP-PHONE.
Press SP-PHONE.
Press HOLD to return to
the Diffserv setting screen.
Select "Secondary Port". Select "DS (Enable)".Press SP-PHONE.
Press SP-PHONE.
Press SP-PHONE.
Diffserv
0.0–7.7
50 Information about IP Proprietary Telephones
4.3 Setting the Diffserv Parameters