4.5 Registering IP Proprietary Telephones
4.5.1 Registering the IP-PTs
After the programming
of both the IP-EXT card and IP-PT is finished, the IP-PT must be registered to the PBX.
This is done by using the Maintenance Console.
Registration
1.
a. Under Configuration, click Slot.
b. Move the mouse pointer over the IP-EXT card. A menu
will be shown under the mouse pointer.
c. Click Port Property
.
2. Click Registration.
A dialogue box will appear. Non-registered (available) ex-
tension numbers are displayed on the left.
3.
a. Highlight numbers and click the right arrow to select
them for registration.
b. Click Next. A screen
will appear with information on the
current IP-PT extension number and index number for
programming.
c. Click Next.
• If the registration is still in progress, the dialogue box
will show "Waiting for IP-PT to register…". Click
OK.
• If the registration is successful, the dialogue box will
show "Registration Succeed". If there are more
IP-PTs to be registered, click Continue to resume
or Cancel to terminate the registration. If not, click
Close.
Once the IP-PT is successfully registered, the status of the IP-PT will update to show "Registered".
58 Information about IP Proprietary Telephones
4.5.1 Registering the IP-PTs
To Next Page
Loading...
