Panasonic KX-TDA30

Note
If you need to open the ferrite core, use a flathead screwdriver to unlatch the case.
3. Connect the cable to the RJ45 connector of the card.
4. Connect the other end of the cable to the switching hub.
Connecting to a switching hub
IP-EXT4 in the KX-TDA30
PC
IP-PT
with a primary port only
PC
IP-PT
with 2 ports
Ethernet Straight Cable
Switching Hub
Switching Hub
Router
RJ45
Information about IP Proprietary Telephones 29
3.3.1 Connecting the IP-EXT Card