• You may hear a busy tone when trying to access your message box if too many other users
are already accessing their message boxes. In that case, wait a few minutes and try again.
• If the
used recording space (including greeting messages and voice messages left by callers)
for the SVM card reaches a certain limit, the display informs you that the recording space is
almost full, and you will hear dial tone 3 when going off-hook.
Dial Tone 3
• Operation Reference When Accessing Your Message Box
After
entering
the SVM feature number (
38), the operations below are available by entering
the corresponding numbers.
Operation No. Operation
To clear the normal greeting message
To record a normal greeting message
To play back the normal greeting message
To listen to voice messages left by callers
To set a greeting message for each time mode
To leave a voice message to another extension’s message box
Document Version 2008-10 Operating Manual 117
1.3.62 SVM (Simplified Voice Message)
To Next Page
Loading...
