Transferring to an Extension in the PBX
To transfer
Press DSS or dial
extension number.
On-hook.
Talk.
During a conversation
This step can be omitted.
PT/PS
Press TRANSFER.
extension no.
OR
(DSS)
TRANSFER
C.Tone
Dial extension
number.
On-hook.
Talk.
During a conversation
SLT
Press Recall/
hookswitch.
extension no.
C.Tone
This step can be omitted.
• When you are not at your desk or not in the office and receive a forwarded outside call,
for example on your cellular phone, it is possible to transfer the call to an extension in the
PBX by pressing # + desired extension number (if enabled through system programming).
• For
the transfer operation using an SDN button, refer to "1.3.49 PDN (Primary Directory
Number)/SDN (Secondary Directory Number) Extension (
KX-TDA100/KX-TDA200/
KX-TDA600 only)".
To transfer with one touch (One-touch Transfer)
During a conversation with an outside party
PT/PS
Press DSS.
(DSS)
On-hook.
Talk.
This step can be omitted.
Document Version 2008-10 Operating Manual 45
1.3.11 Call Transfer
To Next Page
Loading...
