Panasonic KX-TDA50

• For information about answering a waiting call, refer to "1.3.12 CALL WAITING FEATURES".
1.3.75 Wireless XDP Parallel Mode
Your PS can be used in parallel with a PT or SLT.
When in this mode, incoming calls to a wired telephone also ring the paired PS.
To set
PS
Enter extension number
of the paired telephone.
Press CANCEL.
PS
extension no.
Press TALK. Enter 48.
4 8 1
C.Tone
Enter 1.
To cancel
PSPS
Press CANCEL.
Press TALK.
Enter 48.
4 8 0
C.Tone
Enter 0.
• Some wired telephones are prohibited from using this feature.
• If you go off-hook while your paralleled telephone is in use, the call will switch over to you.
1.4 Display Features
1.4.1 Call Log, Incoming
When you receive an outside call or an external sensor call, call information is recorded automatically in the
incoming call
log. A preprogrammed number of calls can be logged per extension. When the call log is full and
other call arrives, the oldest call is deleted.
You can modify the logged telephone number using the display proprietary telephone or the portable station.
When the Call Log button light turns on, there is a call which you did not answer.
140 Operating Manual Document Version 2008-10
1.4.1 Call Log, Incoming