Panasonic KX-TDA50

To distinguish the ringing tones for each CO, ICD Group, PDN, SDN, or INTERCOM button
(Digital proprietary telephone only)
Press
PROGRAM.
Press ENTER or
STORE.
Enter tone type
number.
PROGRAM
PROGRAM
OR
AUTO DIAL
STORE
R.Tone
Press
PROGRAM.
OR
(CO)
INTERCOM
OR
(ICD Group)
(SDN)
(PDN)
OR
OR
OR
(CO)
INTERCOM
OR
(ICD Group)
(SDN)
(PDN)
OR
OR
Press CO, ICD Group,
PDN, SDN, or
INTERCOM button.
tone type no.
*
To continue
Press CO, ICD Group,
PDN, SDN, or
INTERCOM button.
• * Available tone types vary depending on the telephone you are using:
– KX-NT300 series (except KX-NT321)/KX-NT136/KX-DT300 series (except KX-DT321
)/
KX-T7600 series: Tone types "01" to "30" (01–20: tone, 21–30: melody) are available.
– KX-NT265/KX-NT321/KX-DT321: Only tone types "01" to "08" are available.
It is possible to enter a tone type number from "09" to "30", but you will hear tone type "01".
– Other telephones: Only tone types "01" to "08" are available.
It is possible to enter a tone type number from "09" to "30", but you will hear tone type "02".
• Only one ringing tone can be selected for all PDN buttons on your extension.
To clear the button
Press PROGRAM
or PAUSE.
Press ENTER or
STORE.
2
Enter 2.Press desired
flexible button.
To continue
Press PROGRAM
or PAUSE.
OR
AUTO DIAL
STORE
OR
PROGRAM
PAUSE
OR
PROGRAM
PAUSE
Document Version 2008-10 Operating Manual 175
3.1.4 Customizing the Buttons