Tone 2
• When there are messages that
have previously been listened to
and no new messages on the
SVM card
• When any of the following
features are set:
• Absent Message
• Background Music
• Call Forwarding
• Call Pickup Deny
• Call Waiting
• Do Not Disturb
• Extension Dial Lock
• Executive Busy Override
Deny
• Hot Line
• Timed Reminder
Tone 3
• After pressing TRANSFER or
Recall/hookswitch to hold a call
temporarily (e.g., Call Splitting)
• When the recording space of the
Simplified
Voice
Message feature
becomes almost full
• While a called PS is being
searched
• When Account Code Entry is
performed
• When answering a Timed
Reminder call with no message
• When answering an external
sensor call
Tone 4
Message waiting indication was
received.
When you make calls
Busy Tone
Reorder Tone
The CO line you tried to seize is not
assigned or denied.
Ringback Tones
200 Operating Manual Document Version 2008-10
4.3.1 Tone
To Next Page
Loading...
