Why can't I register the IP-PT on my Panasonic KX-TDE200 PBX?
If you're unable to register the IP-PT on your Panasonic PBX, it might be due to: * The necessary network parameters are not set to the IP-PT: When not using a DHCP server, set the IP address, subnet mask address, and enter the PBX IP address. If necessary, also enter the IP address of the default gateway. When using a DHCP server, enter the PBX IP address.
How to fix noise on external paging on Panasonic PBX?
If you are experiencing noise on external paging with your Panasonic PBX: Use a shielded cable as the connection wire between the PBX and amplifier. A short shielded cable is recommended.
Why is Panasonic PBX phone not ringing?
If the PT (Phone Terminal) is not ringing on your Panasonic PBX, the ringer volume might be off. Turn on the ringer volume.
What to do if speakerphone is not audible on Panasonic PBX?
If you can't hear anything when using the speakerphone on an APT (Analogue Proprietary Telephone) with your Panasonic PBX, the HANDSET/ HEADSET selector might be set to the "HEADSET" position. When the headset is not used, set the HANDSET/HEADSET selector to the "HANDSET" position.
Why can't I hear anything on the speakerphone with Panasonic PBX?
If you can't hear anything when using the speakerphone/monitor mode with a DPT (Digital Proprietary Telephone) on your Panasonic PBX, the "HEADSET" mode may be selected by Personal Programming, "Handset/Headset Selection". When the headset is not used, select the "HANDSET" mode by Personal Programming.
How to fix KX-HGT100 problems on Panasonic PBX?
If the KX-HGT100 isn't working correctly or some features are unavailable on your Panasonic PBX, the firmware of the KX-HGT100 and the MPR software file version of the PBX might not be upgraded to their latest versions. Upgrade the firmware of the KX-HGT100 and the MPR software file version of the PBX to their latest versions.
Why is alternate calling not working on Panasonic PBX?
When using a Wireless Phone (KX-T7880/ KX-T7885/KX-TD7894/ KX-TD7895) with your Panasonic PBX, if Alternate Calling—Ring/ Voice and Live Call Screening (LCS) do not function as set, it is because voice-calling mode and Hands-free mode with LCS are not available with Wireless Phones. Switch the calling mode to ring-calling. Set the LCS mode to "Private".
What to do when extensions don't work during power failure on Panasonic KX-TDE200?
During a power failure, if extensions connected to specific ports on MSLC16/CSLC16/SLC16 and DHLC8/SLC8 cards do not operate on your Panasonic PBX: A DPT or APT is connected to the extension port or the dialling mode (tone or pulse) is incorrect. Disconnect the DPT or APT and connect an SLT. Set the Tone/Pulse switch to the other position.
Why can't I transfer calls on Panasonic KX-TDE200?
If you cannot originate an outside call, transfer a call, or start a conference on your Panasonic PBX, the corresponding flexible button might not exist on the PT (Phone Terminal). Program the flexible button.
How to fix Panasonic PBX telephone when buttons are not responding?
If your Panasonic PBX telephone does not respond when you press the buttons, it might be locked. Try unlocking it. Alternatively, your phone might be connected to an eXtra Device Port, which requires system programming. In this case, you should consult your dealer.
General| LED indicators | Yes |
|---|---|
| SIP extensions | 128 |
| Number of extensions | 256 |
| Number of DECT cell stations | 32 |
Weight and Dimensions| Weight | 15966.5 g |
|---|---|
| Dimensions (WxDxH) | 424 x 276 x 439 mm |
To Next Page
