To Next PageTo Next Page
What to do if a busy tone is heard when making calls using a SIP Extension on Panasonic Telephone?
If, when trying to make calls using a SIP Extension on your Panasonic Telephone, a busy tone is heard, change the port status from Out of Service to In Service using the Maintenance Console.
How to fix Panasonic KX-TDE600 PBX one-touch dialling?
If you cannot make an outside call using the One-touch Dialling button or speed dialling on your Panasonic PBX, it is likely that a line access number was not stored. A line access number is required for outside calls.
Why are the parallelled single line telephones not ringing on Panasonic?
If the parallelled single line telephones are not ringing on your Panasonic system, the "No ring" option may be selected. Change the setting to ring.
Why does my Panasonic KX-TDE600 PBX line disconnect during outside calls?
If you are talking to an outside party and the line is disconnected on your Panasonic PBX, the time limit may have run out. Consult your dealer to extend the time limit, if necessary.
How to fix a Panasonic KX-TDE600 display that is not shown well?
If the display is not shown well on your Panasonic PBX, change the Display contrast level.
How to improve Panasonic KX-TDE600 PBX display?
To improve the display on your Panasonic PBX, try changing the Display contrast level.
How to eliminate noise on external paging with Panasonic PBX?
To eliminate noise on external paging with your Panasonic PBX, use a shielded cable as the connection wire between the PBX and the amplifier. A short shielded cable is recommended.
What to do if Panasonic KX-TDE600 shows SYSTEM ERROR ERR 2001-XXXX?
If your Panasonic PBX system frequently displays the 'SYSTEM ERROR' (ERR 2001-XXXX) during startup, this indicates an unexpected error. The suggested solution is to repair or replace the IP-PT.
What to do if Panasonic Telephone does not operate properly?
If your Panasonic Telephone is not operating properly, try pressing the Reset Button. If that doesn't work, turn the power switch off and then back on. As an alternative, turn off the power switch, unplug the PBX, wait 5 minutes, plug it back in, and turn the power switch back on. If the issue persists, see the error log using the Maintenance Console. If error no. 41 is displayed, replace the IPCMEC/ preinstalled memory card.
How to troubleshoot a Panasonic KX-TDE600 PBX telephone that does not work properly?
If your Panasonic PBX telephone isn't working properly, first confirm with your manager that your settings are correct. If the problem persists, you should consult your dealer.
General| SIP trunking | Yes |
|---|---|
| SIP extensions | 128 |
| Number of extensions | 960 |
| Number of DECT wireless handsets | 512 |
Weight and Dimensions| Weight | 16000 g |
|---|---|
| Dimensions (WxDxH) | 415 x 270 x 430 mm |
Indicates potential for severe injury or death due to misuse.
Alerts to potential for minor injury or property damage due to misuse.
Outlines essential safety requirements for telephone equipment installation and use.
