1.4 During a Conversation
56 User Manual
2. To hold the current call and then talk to the new party
• * You may have to enter the Call Hold feature number after pressing the Recall/hookswitch
on your single line telephone (SLT), depending on the SLT Hold Mode of your PBX.
Call Hold feature number:
– Plan 1: 20 (United Kingdom/New Zealand: 50)
– Plan 2/Plan 3: #20 (United Kingdom/New Zealand: #50)
Ask your manager or dealer about the mode assigned to your PBX.
• An SLT user cannot transfer a new call while holding the current call. To transfer the new
call, first park the original call using the Call Park feature, then go on-hook and off-hook.
PT
Press HOLD.
While hearing a call waiting tone
Disregard this step if both
parties are extensions.
Talk to the
new party.
Press CO or
INTERCOM.
OR
(CO)
SLT
While hearing a call waiting tone
Talk to the
new party.
Press Recall/
hookswitch.
C.Tone &
D.Tone
Off-hook.On-hook.
*
To Next Page
Loading...
