What to do if my Panasonic KX-TEA308 PBX displays 'Voice Msg Full'?
If your Panasonic PBX displays "Voice Msg Full", it means the maximum voice message recording time has been reached. You should delete voice messages stored in your personal message area or in the common message area.
Why is speed dialling not working on my Panasonic KX-TEA308 PBX?
If speed dialling or one-touch dialling isn't working on your Panasonic PBX, the programming might be incorrect. Make sure you've stored the outside (CO) line access number (e.g., 9, 0, or 81-83) at the beginning of the telephone number.
What to do if outside calls cannot be made with a Panasonic KX-TEA308 PT?
If you can't make outside calls with a proprietary telephone (PT) on your Panasonic PBX, a flexible button on the PT may not be programmed to select an outside (CO) line. Program the CO buttons to resolve this.
Why is my Panasonic KX-TEA308 proprietary telephone not ringing?
If your Panasonic PBX proprietary telephone (PT) isn't ringing, the ringer volume might be set to off. Adjust the ringer volume to either 'HIGH' or 'LOW'.
How to fix distorted audio (Music on Hold) on Panasonic KX-TEA308?
If the audio, such as Music on Hold or Background Music, is distorted on your Panasonic PBX, the audio level from the output of the audio source might be too high. Decrease the output level of the external audio source using its volume control.
Why is there noise through the external pager on my Panasonic KX-TEA308?
If you hear noise through the external pager or loudspeaker connected to your Panasonic PBX, and you're using an amplifier, the noise might be introduced through the cable connecting the PBX and the amplifier or loudspeaker. Try using a shielded cable to connect the PBX and the amplifier or loudspeaker. A shorter cable can also reduce noise.
How to check extension number on Panasonic KX-TEA308 PBX?
If you want to confirm your extension number on your Panasonic PBX, press the " " key 2 times while on-hook, or do it through personal programming.
Why can't I send a call waiting tone on my Panasonic KX-TEA308?
If you cannot send a call waiting tone to the dialled extension on your Panasonic PBX, it could be because the other party has not set the Call Waiting feature. Ensure the other party has set the Call Waiting feature.
Why is the message light on my Panasonic KX-TEA308 PBX lit?
If the MESSAGE/Message button light or Message/Ringer Lamp is lit on your Panasonic PBX, it could mean one of three things: someone has left a message waiting indication for you, someone has left a Built-in Voice Message (BV) for you, or someone has left a Voice Mail message for you. Press the MESSAGE/Message button to call the party back or receive the message.
What if Panasonic KX-TEA308 does not operate correctly after restarting?
clear the programming data stored in the PBX.
General| Expandable | No |
|---|---|
| Direct Inward System Access (DISA) | Yes |
| Uniform Call Distribution (UCD) | Yes |
| Built-in Voice Message (BV) | No |
| Caller ID Compatibility | Yes |
| Power Failure Transfer | Yes |
| Capacity | 3 CO lines, 8 Extensions |
| Power Supply | AC 110-240V |
To Next Page
