Panasonic KX-TEA308 - Troubleshooting; Installation

4.1 Troubleshooting
74 Installation Manual
4.1 Troubleshooting
4.1.1 Installation
PROBLEM PROBABLE CAUSE SOLUTION
• Extension telephone does
not function.
• Faulty connection
between the PBX and
telephone.
• Plug the telephone into the same
extension port using a short telephone
cord.
If the telephone functions, then the
connection between the PBX and the
telephone must be repaired.
• Faulty telephone. • Plug the telephone into a known
functioning extension port. If the telephone
does not function, replace the telephone.
• A telephone with an A-A1
relay is connected.
• Use a 2-wire cord.
Set the A-A1 relay switch of the telephone
to the "OUT" or "OFF" position.
• Faulty extension card. • Exchange the card for a known functioning
one.
• Proprietary telephones
(PTs) connected to
extension jacks do not
operate, but single line
telephones (SLTs) do.
• The H and L pins of
extension jacks may have
shorted.
• Turn the Power Switch to the "OFF"
position. Fix the shorted part, then turn the
Power Switch to the "ON" position.
• Noise heard through
external pager
(loudspeaker).
• If using an amplifier, noise
may be being introduced
through the cable
connecting the PBX and
the amplifier or
loudspeaker.
• Use a shielded cable to connect the PBX
and the amplifier or loudspeaker. A shorter
cable will introduce less noise.
• Audio (Music on Hold,
Background Music) is
distorted.
• Audio level from the output
of the audio source is too
high.
• Decrease the output level of the external
audio source by using the volume control
on the audio source.
• Speed Dialling or One-
touch Dialling does not
function.
• Incorrect programming. • Store the outside (CO) line access number
(for example, 9 or 0, 81 through 83) at the
beginning of the telephone number.
• Improper operation other
than the above.
• Turn the Power Switch to the "OFF"
position, and then back to the "ON"
position.