Programming
19
For assistance, please visit http://www.panasonic.com/help
*1 If you program these settings using one of the handsets, you do not need to program the same
item using another handset.
*2 Ringer volume cannot be turned off for intercom calls and paging.
*3 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 to
5). If you select a melody, you cannot distinguish lines by their ringers.
*4 If you select one of the melody ringer tones, the ringer tone continues to play for several
seconds even if the caller has already hung up. You may either hear a dial tone or no one on
the line when you answer the call.
*5 The preset melodies in this product are used with permission of © 2007 Copyrights Vision Inc.
*6 The flash time depends on your telephone exchange or host PBX. Contact your PBX supplier
if necessary. The setting should stay at “700 ms” unless pressing {FLASH} fails to pick up
the waiting call.
*7 Turn this feature off if you prefer not to hear key tones while you are dialing or pressing any
keys, including confirmation tones and error tones.
*8 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*9 The handset can display the Internet address where you can download the operating
instructions or get further information for this product, using your computer.
Initial setting Ringer settings Ringer volume
*2
<Level 6>
–
Ringer tone
*3,
*4,
*5
<Tone 1>
–
Display settings Change language
<English>
11
Contrast <Level 3> –
Set tel line Set dial mode
*1
<Tone>
11
Set flash time
*1,
*6
<700 ms>
14
VM tone detect
*1
<On>
28
Call sharing
*1
<On>
–14
Registration HS registration
(HS: handset)
20
Deregistration 20
Key tone
*7
<On>––
Auto talk
*8
<Off>–13
Caller ID edit
<On>
–22
Date and time
*1
––11
Customer support
*9
–––
Main menu Sub-menu 1 Sub-menu 2 Page
TG122x.book Page 19 Wednesday, September 29, 2010 2:13 PM
To Next Page
Loading...
