Panasonic KX-TG4114C - Finding and Calling from Phonebook; Chain Dial Feature

Shared Phonebook
20
5
Edit the name (10 characters max.; page
19). s {SAVE}
6 {OFF}
Finding and calling from a
phonebook entry
Scrolling through all entries
1 {C}
2 {r}: Select the desired entry.
3 {C}
Searching by first character
1 {C}
2 Press the dial key () – 9 or () which
contains the character you are searching
for (page 19).
L Press the same dial key repeatedly to
display the first entry corresponding to
each character located on that dial
key.
L If there is no entry corresponding to
the character you selected, the next
entry is displayed.
3 {r}: Scroll through the phonebook if
necessary.
4 {C}
Searching by group
1 {C} s {GROUP}
2 {r}: Select the group you want to search.
s {SELECT}
L If you select “All groups”, the unit
ends the group search.
3 {r}: Select the desired entry.
4 {C}
Editing entries
1
Find the desired entry (page 20). s
{EDIT}
2 Edit the name if necessary (16 characters
max.; page 19). s {OK}
3 Edit the phone number if necessary (24
digits max.). s {OK}
4 {r}: Select the desired group (page 19).
s {SELECT} 2 times
5 {OFF}
Erasing entries
Erasing an entry
1 Find the desired entry (page 20).
2 {ERASE}
3 {r}: “Yes” s {SELECT} s {OFF}
Erasing all entries
1 {C} s {MENU}
2
{r}: “Erase all” s {SELECT}
3 {r}: “Yes” s {SELECT}
4 {r}: “Yes” s {SELECT}
5 {OFF}
Chain dial
This feature allows you to dial phone numbers
in the phonebook while you are on a call. This
feature can be used, for example, to dial a
calling card access number or bank account
PIN that you have stored in the phonebook,
without having to dial manually.
1 During an outside call, press {MENU}.
2 {r}: “Phonebook” s {SELECT}
3 {r}: Select the desired entry.
4 Press {CALL} to dial the number.
Note:
L When storing a calling card access number
and your PIN in the phonebook as one
phonebook entry, press {PAUSE} to add
pauses after the number and PIN as
necessary (page 16).
L If you have rotary/pulse service, you need
to press * (TONE) before pressing
{MENU} in step 1 to change the dialing
mode temporarily to tone. When adding
entries to the phonebook, we recommend
adding * (TONE) to the beginning of
phone numbers you wish to chain dial
(page 19).
TG41xxC(e).book Page 20 Wednesday, December 22, 2010 3:59 PM