Panasonic KX-TG4114C - Intercom and Locator Features; Intercom Features; Call Transfer and Conference Calls

Intercom/Locator
39
Intercom
Intercom calls can be made between
handsets.
Note:
L If you receive an outside call while talking
on the intercom, you hear 2 tones. To
answer the call, press {OFF}, then press
{C}.
L When paging the handset, the paged
handset beeps for 1 minute.
Making an intercom call
1 {MENU} s {INT}
2 {r}: Select the desired unit. s
{SELECT}
L To stop paging, press {OFF}.
3 When you finish talking, press {OFF}.
Answering an intercom call
1
Press {C} to answer the page.
2 When you finish talking, press {OFF}.
Handset locator
You can locate a misplaced handset by paging
it.
1 Base unit: Press {LOCATOR}.
L All registered handsets beep for 1
minute.
2 To stop paging:
Base unit: Press {LOCATOR}.
Handset: Press {OFF}.
Transferring calls,
conference calls
Outside calls can be transferred or a
conference call with an outside party can be
made between 2 handsets.
1 During an outside call, press {INT} to put
the call on hold.
2 {r}: Select the desired unit. s
{SELECT}
3 Wait for the paged party to answer.
L If the paged party does not answer,
press {C} to return to the outside call.
4 To complete the transfer:
Press {OFF}.
L The outside call is being routed to the
destination unit.
To establish a conference call:
{MENU} s {r}: “Conference” s
{SELECT}
L To leave the conference, press {OFF}.
The other 2 parties can continue the
conversation.
L To put the outside call on hold:
{MENU} s {r}: “Hold” s
{SELECT}
To resume the conference:
{MENU} s {r}: “Conference” s
{SELECT}
Answering a transferred call
Press {C} to answer the page.
TG41xxC(e).book Page 39 Wednesday, December 22, 2010 3:59 PM