Preparation
10 For assistance, please call 1-800-211-PANA (7262).
If you subscribe to an xDSL service
L Please attach a noise filter (contact your
xDSL provider) to the telephone line
between the base unit and the telephone
line jack in the event of the following:
– Noise is heard during conversations.
– Caller ID features (page 26) do not
function properly.
Battery installation
1 Release the battery cover latch and lift
the cover open.
2 Insert the battery (1), and press it
down until it snaps into the
compartment (2).
3 Close the handset cover.
4 Fasten the battery cover latch.
Telephone
line cord
Noise filter
(For xDSL users)
To single-line telephone
jack (RJ11C)
1
2
TG5438_5439.book Page 10 Friday, August 25, 2006 9:35 AM
To Next Page
Loading...
