Answering System
37
LYou can hang up, or if you call from
a touch tone phone, you can enter
your remote code and begin
remote operation (page 36).
Skipping the greeting
message to leave a message
You can leave a message just as any
outside caller can. Call your phone
number. When the answering system
picks up, press {*} to skip the greeting
message and record your message
after the beep.
Answering system
settings
Remote code
A remote code must be entered when
operating the answering system
remotely. This code prevents
unauthorized parties from listening to
your messages remotely. The default
setting is “11”.
1 {MENU} i {0}{6}{3}
2 Enter the desired 2-digit remote
code. i {Save} i {OFF}
Ring count
You can change the number of times
the phone rings before the unit answers
calls.
The default setting is “4”.
“Toll saver”: The unit answers on
the 2nd ring when new messages have
been recorded, and on the 4th ring
when there are no new messages. If
you call your phone from outside to
listen to new messages (page 36), you
will know that there are no new
messages when the phone rings for the
3rd time. You can then hang up without
being charged for the call.
1 {MENU} i {0}{6}{1}
2 {V}/{^}: Select the desired setting.
3 {Save} i {OFF}
For Voice Mail service subscribers
If you subscribe to a flat-rate service
package that includes Call Display, Call
Waiting, Voice Mail, and unlimited local/
regional/long distance calls, please
note the following:
LTo use the Voice Mail service
provided by your telephone service
provider rather than the unit’s
answering system, turn off the
answering system (page 33).
LTo use this unit’s answering system
rather than the Voice Mail service
provided by your telephone service
provider, please contact your
telephone service provider to
deactivate your Voice Mail service.
If your telephone service provider
cannot do this:
– Set this unit’s “Ring count”
setting so that this unit’s answering
system answers calls before the
Voice Mail service of your
telephone service provider does. It
is necessary to check the ring count
required to activate the Voice Mail
service provided by your telephone
service provider before changing
this setting.
– Change the ring count of the Voice
Mail service so that the answering
system can answer the call first. To
do so, consult your telephone
service provider.
TG602X_603X_605XC(e).book Page 37 Tuesday, December 26, 2006 1:55 PM
To Next Page
Loading...
