Panasonic KX-TG6021C - Headset (Optional); Lanyard;Strap Eyelet

Useful Information
44
To remove the wall mounting adaptor
While pushing down the lever (A),
remove the adaptor (B).
Charger
1
Drive the screws (not included) into
the wall.
2 Mount the charger (A), then slide it
down (B) and to the right (C) until it
is secure.
Headset (optional)
Connecting a headset to the handset
allows hands-free phone
conversations. We recommend using
the Panasonic headset noted on page
6.
LHeadset shown is RP-TCA86.
Switching a call between the headset
and handset speakerphone
To switch to the handset speakerphone,
press {s}.
To return to the headset, press {C}.
Lanyard/strap eyelet
If you have a lanyard/strap (not
included), you can hang your handset
from your neck or wrist. Thread it
through the eyelet as shown and pull to
tighten it.
Available model:
KX-TG6022/KX-TG6023/KX-TG6032/
KX-TG6033/KX-TG6034/KX-TG6052/
KX-TG6053
A
B
25.4 mm
(1 inch)
Screws
(120 V AC, 60 Hz)
A
B
C
TG602X_603X_605XC(e).book Page 44 Tuesday, December 26, 2006 1:55 PM