Programming
27
Programmable settings
You can customize the unit by programming the following features using the handset.
To access the features, there are 2 methods:
– scrolling through the display menus (page 27)
– using the direct commands (page 29)
LMainly the direct command method is used in these operating instructions.
Programming by scrolling through the display menus
1
{MENU}
2 Press {V} or {^} to select the desired menu. i {Select}
LIf there is a sub-menu(s), press {V} or {^} to select the desired item. i
{Select}
3 Press {V} or {^} to select the desired setting. i {Save}
LThis step may vary depending on the feature being programmed.
4 {OFF}
Main menu Sub-menu 1 Sub-menu 2 Page
Message play
(KX-TG6031/
KX-TG6032/
KX-TG6033/
KX-TG6034/
KX-TG6051/
KX-TG6052/
KX-TG6053)
––35
V.M. access ––40
Alarm ––32
Ringer setting Ringer volume ––
Ringer tone ––
Ring colour ––
Set date & time Date and time
*1
–15
Time adjustment
*1
––
Voice enhancer ––19
Copy phonebook Copy 1 item –22
Copy all items –22
TG602X_603X_605XC(e).book Page 27 Tuesday, December 26, 2006 1:55 PM
To Next Page
Loading...
