Panasonic KX-TG6021C - Page 29

Programming
29
*1 If you program these settings using one of the handsets, you do not need to
program the same item using another handset.
Programming using the direct commands
1
{MENU}
2 Enter the desired feature code.
3 Enter the desired setting code. i {Save}
LThis step may vary depending on the feature being programmed.
4 {OFF}
Note:
LIn the following table, < > indicates the default setting.
LIf you make a mistake or enter the wrong code, press {OFF}, then start again from
step 1.
Initial setting
Change language Voice prompt
*1
(KX-TG6031/
KX-TG6032/
KX-TG6033/
KX-TG6034/
KX-TG6051/
KX-TG6052/
KX-TG6053)
15
Feature Feature
code
Setting code System
setting
*1
Page
Alarm {8}{1}: Once {0}: <Off>–32
Auto talk
*2
{0}{3}{1}: On {0}: <Off>–18
Copy phonebook
(1 item)
{#}{1} ––22
Copy phonebook
(all items)
{#}{2} ––22
C.WTG options
(Call Waiting
options)
{0}{5}{4}{1}: On {0}: <Off>
r
24
Date and time {4}{1} – r 15
Deregistration {0}{0}{2} ––42
HS
registration
{0}{0}{1} ––42
Main menu Sub-menu 1 Sub-menu 2 Page
TG602X_603X_605XC(e).book Page 29 Tuesday, December 26, 2006 1:55 PM