Panasonic KX-TG6411FX - Display Language; Dialling Mode; Date and Time

Getting Started
16
Display language
16 display languages are available.
1 8 (middle soft key)
2 {V}/{^}: “Handset Setup” i
M
3 {V}/{^}: “Display Setup” i
M
4 {V}/{^}: “Language” i M
5 {V}/{^}: Select your desired
language. i M i {ih}
If you select a language you cannot
read
1 {ih} i 8
2 Proceed with the operation for your
model.
■ KX-TG6411/KX-TG6412
{^} 3 times i M
■ KX-TG6421
{^} 4 times i M
3 {V} 2 times i M 2 times i
{V}/{^}: Select your desired
language. i M i {ih}
Dialling mode
If you cannot make calls, change this
setting according to your telephone line
service. The default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
1 8 (middle soft key)
2 {V}/{^}: “Base Unit Setup” i
M
3 {V}/{^}: “Dial Mode” i M
4 {V}/{^}: Select the desired setting.
i M i {ih}
Date and time
1
8 (middle soft key)
2 {V}/{^}: “Handset Setup” i
M
3 {V}/{^}: “Time Settings” i
M
4 {V}/{^}: “Set Date/Time” i
M
5 Enter the current date, month, and
year. i M
Example: 15 July, 2009
{1}{5} {0}{7} {0}{9}
6 Enter the current hour and minute.
Example: 9:30
{0}{9} {3}{0}
L You can select 24-hour or 12-hour
clock format (“AM” or “PM”) by
pressing {*}.
7 M i {ih}
Note:
L To correct a digit, press {^} or {V} to
move the cursor to the digit, then
make the correction.
L The date and time may be incorrect
after a power failure. In this case, set
the date and time again.
Important:
L When the language selection is
displayed after installing the
batteries for the first time, perform
step 5.
TG6411-6421FX(e).book Page 16 Friday, February 27, 2009 11:44 AM