Panasonic KX-TG6411FX - Receiving a Message

SMS (Short Message Service)
33
6 {V}/{^}: “Yes” i M i {ih}
Receiving a message
When an SMS message is received:
– “Receiving SMS Message” is
displayed.
– a tone is heard (if the handset ringer is
turned on).
– h is displayed with the total number
of new (unread) SMS messages.
Reading a received message
1
8 (middle soft key)
2 {V}/{^}: “SMS” i M
3 {V}/{^}: “Receive List” i M
4 {V}/{^}: Select a message.
L Messages which have already
been read are indicated by a “Q”,
even if they were read using
another handset.
L To erase a message, press W.
i {V}/{^}: “Yes” i M
5 Press M to read the message
content.
Note:
L To call the message sender, press
{C}.
Replying to a message
1
While reading a received message,
press 8.
2 {V}/{^}: “Reply” i M
3 Enter a message (page 44). i
M
4 Edit the destination phone number if
necessary. i M
5 Continue from step 6, “Writing and
sending a new message”, page 32.
Editing/forwarding a message
1
While reading a received message,
press 8.
2 {V}/{^}: “Edit Message” i M
3 Continue from step 4, “Writing and
sending a new message”, page 32.
Erasing received messages
1
While reading a received message,
press 8.
2 {V}/{^}: “Erase” i M
L To erase all messages, select
“Erase All”. i M
3 {V}/{^}: “Yes” i M i {ih}
Storing the sender’s number
in the phonebook
1
While reading a received message,
press 8.
2 {V}/{^}: “Add Phonebook” i
M
3 To store the name, continue from
step 3, “Adding entries”, page 20.
Editing the sender’s number
before calling back
1
While reading a received message,
press 8.
2 {V}/{^}: “Edit & Call” i M
3 Edit the number. i {C}
TG6411-6421FX(e).book Page 33 Friday, February 27, 2009 11:44 AM