Useful Information
49
Programmable settings
*1 KX-TG6421
Battery recharge
I do not know how to erase y
(Missed call) from the display.
L There are unviewed missed calls remaining.
View them and erase y in the following way.
1 8 (middle soft key)
2 {V}/{^}: “Caller List” i M
3 Press {V} to search from the most recent
call, or press {^} to search from the oldest
call.
Problem Cause/solution
I have changed the display
language to a language I
cannot read.
L Change the display language (page 16).
While programming, the
handset starts to ring.
L A call is being received. Answer the call and
start again after hanging up.
While programming, the
display returns to standby
mode.
L A call matching an entry in the call barred list
is being received.
*1
Wait and try again later.
I cannot register a handset to a
base unit.
L The maximum number of handsets (6) is
already registered to the base unit. Cancel
unused handset registrations from the base
unit (page 28).
L You entered the wrong PIN. If you forget your
PIN, contact your nearest Panasonic service
centre.
L Place the handset and the base unit away
from other electrical appliances.
Problem Cause/solution
The handset beeps and/or )
flashes.
L Battery charge is low. Fully charge the
batteries (page 11).
I fully charged the batteries, but
) still flashes.
L Clean the charge contacts and charge again
(page 12).
L It is time to replace the batteries (page 11).
I fully charged the batteries, but
the operating time seems to be
shorter.
L Clean the battery ends (S, T) and the
charge contacts with a dry cloth and charge
again.
Problem Cause/solution
TG6411-6421FX(e).book Page 49 Friday, February 27, 2009 11:44 AM
To Next Page
Loading...
